Honeywell HTR62 Installation And Operating Manual page 42

Specifications
Specification (cont'd)
Connector
No video signal
VCR audio signal
Audio recording
Output level
Signal to noise ratio
Frequency response
Audio distortion
Connector
Text overlay
Title
Time and date
Position
Recorded signals
Number of inputs
Text
Input level
Input protection
Speed indicator
Range
Calibration method
Note Specifications are subject to change without notice.
Rev 1.01
Description
RCA (back panel input)
RCA (front panel output)
Auto detection, message displayed on the screen
Hi Fi
Two heads, rotating
-7 dBm, 10K Ω maximum
60 dB
20 Hz to 20 kHz ± 3 dB
Less than 0.5%
RCA
Up to 20 characters, user selectable
Real time clock with battery backup
and automatic Daylight Saving Time
AM/PM format, three letters for month
Top or bottom of screen, independent
for each value, user selectable
Five
Three characters per signal, user
selectable
Active high (12 VDC) or active low
(0 VDC), user selectable
Reverse polarity protection, 600W
transient protection
0 to 255 MPH or KPH
Direct: drive the bus one mile (or one
km)
Indirect: enter a calibration number
30
Mono
One head, stationary
-6 dBm into 600 Ω, unbalanced
40 dB
100 Hz to 8 kHz
Less than 3% (SP mode)
Document 900.0341
12/05