Related Manuals for HIKVISION DS-2CC5102P
Summary of Contents for HIKVISION DS-2CC5102P
- Page 1 Day Night Dome Camera· User Manual Day Night Dome Camera User Manual UD.6L0201D0117A01...
- Page 2 Day Night Dome Camera· User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to following cameras: Models Models DS-2CC5102P(N) DS-2CC5112P(N) DS-2CC5172P(N) DS-2CC5182P(N) DS-2CC5192P(N) DS-2CC51A2P(N) This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice.
-
Page 3: Regulatory Information
Day Night Dome Camera· User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital dev ice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 4 Day Night Dome Camera· User Manual 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
-
Page 5: Safety Instruction
Day Night Dome Camera· User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. - Page 6 Day Night Dome Camera· User Manual responsibility for problems caused by unauthorized repair or maintenance.) To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. This installation should be made by a qualified service person ...
- Page 7 Day Night Dome Camera· User Manual The sensor may be burned out by a laser beam, so when any laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam. Do not place the camera in extremely hot or cold temperatures ...
-
Page 8: Table Of Contents
Day Night Dome Camera· User Manual Table of Contents 1 Introduction ................8 1.1 Features ..............8 1.2 Overview ..............9 2 Installation................11 2.1 Ceiling Mounting ............ 11 2.2 Wiring ..............17 Appendix................18 1 Glossary ..............18 2 Troubleshooting............22 3 Technical Maintenance ..........25... -
Page 9: Introduction
Day Night Dome Camera· User Manual 1 Introduction 1.1 Features This camera adopts high performance sensor and advanced print circuit board design techno logy. It possesses of high resolution, low distortion, and low noise features, etc. It is extremely suitable for surveillance system and image process system. -
Page 10: Overview
Day Night Dome Camera· User Manual 1.2 Overview The appearance of the cameras is as follows: Figure 1-1 Overview Table 1-1 Overview Description Description 1 Black Liner 2 Lower Dome... - Page 11 Day Night Dome Camera· User Manual Description Description 3 Camera 4 Tilt Lock Screws 5 Power Output 6 Video Output...
-
Page 12: Installation
Day Night Dome Camera· User Manual 2 Installation Before you start: Please make sure that the device in the package is in good condition and all the assembly parts are included. Make sure that all the related equipment is power-off during ... - Page 13 Day Night Dome Camera· User Manual Anticlockwise Figure 2-1 Remove the Lower Dome 2. Remove the black liner. Figure 2-2 Remove the Black Liner...
- Page 14 Day Night Dome Camera· User Manual 3. Attach the drill template (supplied) to the place where you want to fix the camera. 4. Drill two screws holes according to the circles on the drill template as shown in Figure 2-3. Figure 2-3 The Drill Template...
- Page 15 Day Night Dome Camera· User Manual 5. Attach the camera to the ceiling by aligning screw holes of the camera with the screw ho les on the drill template. 6. Secure the camera with screws as shown in Figure 2-4. 7.
- Page 16 Day Night Dome Camera· User Manual 5). Tighten the tilt lock screws. 6). Rotate the lens to adjust the azimuth angle of the image. 水平可调 355 度 垂直可调 90 度 旋转可调 355 度 Figure 2-5 Three-axis Adjustment 9. Rotate the black liner clockwise back to the camera. Figure 2-6 Install the Black Liner...
- Page 17 Day Night Dome Camera· User Manual 10. Rotate the lower dome clockwise back to the camera. Clockwise Figure 2-7 Install the Lower Dome Figure 2-8 Finish the Installation...
-
Page 18: Wiring
Day Night Dome Camera· User Manual 2.2 Wiring Please make sure that the power adapter matches w ith the camera. The standard power supply of the camera is 12V DC (Please refer to technical specifications for more details). Please plug the power adapter not too far away because the ... -
Page 19: Appendix
Day Night Dome Camera· User Manual Appendix 1 Glossary Note: The glossary gives brief explanations to the basic operation principle or the basic function of the camera. However, it doesn’t mean the listed functions are all supported by the cameras mentioned in this manual. -
Page 20: White Balance
Day Night Dome Camera· User Manual AGC is a control circuit that automatically changes the gain of a receiver or other piece of equipment, so that the desired output signal remains essentially. When under low illumination, AGC will regulate the gain and amplification of the video signal. S/N ratio: It is the ratio of Signal voltage and no ise voltage. -
Page 21: Privacy Mask
Day Night Dome Camera· User Manual Privacy Mask: This function allows you to block or mask certain area of a scene, thus prevent the personal privacy from recording or live view ing. OSD (On Screen Display): OSD is the texts superimposed on a screen. It can show the menu on the screen. -
Page 22: Digital Zoom
Day Night Dome Camera· User Manual CCD besides processing the noise in the separated Y video signal and C video signal. HLC (High Light Compensation): The HLC is capable of detecting and reversing the bright spots in the picture (such as headlights) to black so as to achieve optimum picture quality. -
Page 23: Troubleshooting
Day Night Dome Camera· User Manual 2 Troubleshooting Problem 1: Why does the camera restart intermittently? And the problem is much more serious when infrared lights of IR camera are turned on at night. Possible Reasons: The main and common reason is power supply shortage. This problem may happen to the IR camera especially at night, because the infrared lights are turned on at night and increase the power consumption. - Page 24 Day Night Dome Camera· User Manual Problem 3: The camera is installed w ith an auto-iris lens. You adjust the focus to get a clear image in the daytime. But the image is defocused at night. Possible Reasons: In the daytime, the illumination is high, so the iris is adjusted to a small size automatically.
- Page 25 Day Night Dome Camera· User Manual To Solve the Problem: Check the auto-iris lens connector to ensure good contact. Set the iris driven mode of the camera the same as the m ode of lens. The modes can be VD (video drive) or DD (direct drive). DD mode is commonly used.
-
Page 26: Technical Maintenance
Day Night Dome Camera· User Manual 3 Technical Maintenance Lens Maintenance The lens surface is plated an anti-reflection coating. The dust, oil and finger print, etc. w ill cause scratch, mildewed and performance degraded. Please refer to the following method to clean the lens. - Page 27 Day Night Dome Camera· User Manual 3. Change the cloth to wipe the bubble until the bubble is clean. Glass Maintenance of IR Camera Steps: 1. Wipe off the dust, water-drop or oil by soft cloth and dry the glass. 2.
- Page 28 Day Night Dome Camera· User Manual...