Using The Speakerphone Or A Headset; Using The Speakerphone; Using The Headset With Your Ip Phone - Cisco SPA50X User Manual

Using Basic Phone Functions

Using the Speakerphone or a Headset

NOTE

Using the Speakerphone or a Headset

NOTE
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
All the features of these phones can be modified by your phone system
administrator. Not all of features described in this document may be available or
they might function slightly differently on your phone. This document describes the
features as they function in factory default mode.
You can use the handset, headset, or speakerphone to place or receive a call. And
you can switch among these devices during a call; however, only one of these
devices at a time can be used.
When switching from the handset to the speakerphone, make sure the
speakerphone or headset light is illuminated before placing the handset back on
the hook. When switching from the handset to a wireless headset, do not replace
the handset on hook or you will disconnect the call.

Using the Speakerphone

To use the speakerphone, press the Speaker button (the handset can be either on
or off hook).

Using the Headset with Your IP Phone

Install the headset as described in the
(Optional)" section on page 16
Thye steps to install and use a headset with the IP phone can vary. Consult the user
documentation for your headset for more information.
To use a wired headset, press the Headset button on your phone and dial the
number to place a call, or press the Headset button to answer an incoming call.
To use a wireless headset, lift the handset off hook to speak and listen through the
wireless headset.
"Connecting a Wired or Wireless Headset
3
21