Autoanswer With Headset Or Speakerphone - Cisco 7931G User Manual

Handset, Headset, and Speaker

AutoAnswer with Headset or Speakerphone

When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings. Your
system administrator configures AutoAnswer to use either the speakerphone or a headset. You may use
AutoAnswer if you receive a high volume of incoming calls.
If you...
Use AutoAnswer with
a headset
Use AutoAnswer with the
speakerphone
Tip
AutoAnswer is disabled when Do Not Disturb is active.
Then...
Keep headset mode active (in other words, keep
when you are not on a call.
To keep headset mode active, do the following:
• Press EndCall to hang up.
• Press New Call or Dial to place new calls.
If your phone is set up to use AutoAnswer in headset mode, calls are
automatically answered only if
normally and you must manually answer them.
Keep the handset in the cradle and headset mode inactive (
Otherwise, calls ring normally and you must answer them manually.
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

AutoAnswer with Headset or Speakerphone

( ) illuminated), even
( ) is illuminated. Otherwise, calls ring
( ) unlit).
57