Ending A Call; Transferring Calls; Performing A Transfer - Cisco SPA50X User Manual

Using Basic Phone Functions

Ending a Call

Ending a Call

Transferring Calls

STEP 1
STEP 2
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
To end a call:
• Press the EndCall button.
• If you are using the handset, hang up.
• If you are using the speakerphone, press the Speaker button.
• If you are using the headset, either press the Headset button (wired) or
replace the handset (wireless).
You can perform two types of transfers:
• Attended—You call the person to whom you are transferring the call and
speak to them before transferring the call.
• Blind—You transfer the call without speaking to the other party to whom you
are transferring the call.

Performing a Transfer

Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G:
During an active call, press Trnsfer. The call is placed on hold and a new line is
opened to dial the number.
Enter the number where you want to transfer the call, then press Dial or wait a few
seconds for the other line to ring.
3
24