Cisco SPA50X User Manual page 45

Using the Cisco SPA500S Attendant Console
Connecting the Cisco SPA500S Attendant Console to the IP Phone
!
CAUTION
STEP 8
STEP 9
STEP 10
STEP 11
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
Do not plug a telephone line cord into the AUX port. Use
provided with the Cisco SPA500S.
Locate the AUX IN port on the back of the Cisco SPA500S. Connect one end of the
auxiliary cable to this port.
Locate the AUX port on the back of the IP phone. Connect the other end of the
auxiliary cable to this port. The Cisco SPA500S is powered by the auxiliary cable
with the IP phone; no additional power source is required.
Route the auxiliary cable inside the cable slot of the Cisco SPA500S.
Attach the appropriate desktop stand to each unit.
5
only the auxiliary cable
45