Black & Decker NPS9010 Instruction Manual page 7

90513658 NPS1018 1/15/07 2:02 PM
Features
Before using your Power Scrubber familiarize yourself with all
operating and safety features.
9
7 6
8
12
D 11
A. Handle Module
B. Center Extension 1 (orange connectors) for medium length
C. Center Extension 2 (green connectors) for long length (NPS1018
only)
D. Power Head Module
1. On/Off Switch 8. Release Ring
2. Battery Cover 9. Pivot Lock Mechanism
3. Battery 10. Charger
4. Foam Gripper 11. 8" Auto Brush (orange
5. Threaded Pole
6. Threaded Sleeve 12. 8" General Purpose
7. Pivoting Power Head
Page 7
B
5
C
1
4
A
10
3
and grey bristles)
Scrub Brush (black bristles)
(NPS1018 only)
CAUTION: Do not use general purpose brushes (black bristles) on
painted surfaces.
CAUTION: Before using any brush wash and inspect the brush and
bristles for wear and debris. Do not use if bristles are worn or
washing does not remove the debris.
Installing and Removing Brush
WARNING: Remove battery from handle when installing and
removing brushes to prevent accidental operation.
• Place the Scrubber on a firm surface.
• Slide the release ring toward the Power
2 Head. Fig. 8
• Insert or remove the Brush Head from
the Power Head. Release the ring.
CAUTION: After installing a brush
ensure it is properly seated and restrained to prevent the brush from
falling off by pulling on the brush away from the Power Head.
7
8