Operating Position - Black & Decker NPS9010 Instruction Manual

90513658 NPS1018 1/15/07 2:02 PM
Rotating or Locking the Power Head
The Power Head can be used in either a pivoting or fixed position.
The unlock symbol denotes that Power Head is in Pivot Mode.
This is useful for contoured surface and when cleaning large areas
with a back and forth motion. The Lock Symbol
Power Head is in fixed position. This is useful for aggressive
scrubbing or when cleaning a large surface area with a side to side
motion. The user has a choice to use the power head in either pivot
mode or fixed mode. The power head may be fixed at any angle
within the 80º of rotation. To change the operating mode, flip lock
wing out from it's storage position, twist to rotate the wing 180º, then
fold back to the storage position ensuring that it securely snaps back
into place.
Rotating Position
Page 10
Switch
Always be sure of your footing and grip the Power Scrubber firmly
with both hands with the thumb and fingers encircling the grip. To turn
the tool ON press the on button (I). To turn the Power Scrubber off
press the off button (0).
To avoid splatter from a Brush turn the scrubber off while the
denotes that the
attachment is still in contact with the surface.
Because this scrubber is powerful, you don't have to apply excessive
pressure while operating.

Operating Position

The Power Scrubber works best with a wet and soapy surface. The
surface may be first sprayed or soaked with water, and/or detergent,
or the Power Scrubber may be dunked into a bucket of detergent
that is diluted to the recommended amount on it's product label.
Use the Power Scrubber with no extensions for lower and very
contoured surfaces like cars, SUV's, etc. With no extensions most
people can achieve an 8 foot reach.
Fixed Position
10