Setting Up Forced Authorization Codes; Setting Up The Incoming Call Toast Timer; Setting Up Peer Firmware Sharing - Cisco 8961 Administration Manual

Chapter 8 Configuring Features, Templates, Services, and Users
Check the load information in the Inactive Load Information field.
Step 2
From the Bulk Administration > Import/Export > Export > Device Defaults window, schedule an
Step 3
export job.
Download the exported tar file and untar it.
Step 4
Check the file format in the exported CSV file and verify that the CSV file has a column for "Inactive
Step 5
Load Information" with correct value.
The CSV file value must match the Device Default value in the Cisco Unified CM Administration
window.

Setting up Forced Authorization Codes

To force users to enter a Forced Authorization Code (FAC) when placing a call, set up the following
fields in Call Routing > Forced Authorization Code.
Table 8-8
Field
Require Forced
Authorization Code
Authorization Level
For more information, see the Route Pattern Configuration section of the Cisco Unified Communications
Manager Administration Guide.

Setting up the Incoming Call Toast Timer

You can set the time that the Incoming Call Toast (incoming call notification window) displays on the
user's phone. You set up the feature from one of the following Cisco Unified Communications Manager
windows:
•
•
•
Table 8-9
Field
Incoming Call Toast
Timer

Setting up Peer Firmware Sharing

Go to Cisco Unified CM Administration > Device > Phone.
Step 1
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
FAC Field
Description
Select the check box to require a user to enter an FAC.
The code that the user must enter to be authorized to place the call.
System > Enterprise Phone Configuration
Device > Device Settings > Common Phone Profile
Device > Phone > Phone Configuration
Incoming Call Toast Timer Field
Description
Gives the time, in seconds, that the toast displays. The time includes the fade
in and fade out times for the window.
The possible values are 3, 4, 5, 6, 7, 8, 9, 10, 15, 30, and 60.
The default is 5.
Configuring Features
8-39