Displaying A Setup Menu; C H A P T E R 7 Configuring Settings On The Cisco Unified Ip Phone - Cisco 8961 Administration Manual

Setup Menus on the Cisco Unified IP Phone
For information about the keys you can use to edit or change option settings, see the
section on page
You can control whether a phone user has access to phone settings by using the Settings Access field in
the Cisco Unified Communications Manager Administration Phone Configuration window (in the
Product Specific Information portion of the window).
Related Topics
•
•
•
•
•
•
•

Displaying a Setup Menu

To display a configuration menu, perform the following steps.
Procedure
Press the Applications button
Step 1
Select Administrator Settings.
Step 2
Select Network Setup or Security Setup.
Step 3
Note
Enter your user ID and password, if required, then click Sign-In.
Step 4
Perform one of these actions to display the desired menu:
Step 5
•
•
To display a submenu repeat
Step 6
To exit a menu, press the Exit softkey or the back arrow softkey
Step 7
Related Topics
•
•
•
•
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
7-2
7-3.
Displaying a Setup Menu, page 7-2
Unlocking and Locking Options, page 7-3
Editing Values, page 7-3
Ethernet Setup Menu, page 7-4
WLAN Setup Menu, page 7-7
IPv4 Setup Menu Options, page 7-10
Security Setup Menu, page 7-13
For information about the Status menu, see
and Statistics on the Cisco Unified IP Phone."
see Chapter 12, "Troubleshooting and Maintenance."
Use the navigation arrows to select the desired menu and then press the Select button.
Use the keypad on the phone to enter the number that corresponds to the menu.
Step
Unlocking and Locking Options, page 7-3
Editing Values, page 7-3
Ethernet Setup Menu, page 7-4
WLAN Setup Menu, page 7-7
Chapter 7 Configuring Settings on the Cisco Unified IP Phone
.
Chapter 10, "Viewing Model Information, Status,
For information about the Reset Settings menu,
5.
"Editing Values"
.