Pppoe/Pppoa - Draytek Vigor2800 Series User Manual

Below shows the menu items for Internet Access.
3 . 1 . 2 P P P o E /
3 . 1 . 2 P P P o E /
PPPoA, included in RFC1483, can be operated in either Logical Link Control-Subnetwork
(LLC) Access Protocol or VC-Mux mode. As a CPE device, Vigor router encapsulates the
PPP session based for transport across the ADSL loop and your ISP's Digital Subscriber Line
Access Multiplexer (SDLAM).
To choose PPPoE or PPPoA as the accessing protocol of the internet, please select
PPPoE/PPPoA from the Internet Access menu. The following web page will be shown.
PPPoE/PPPoA Client
DSL Modem Settings
18
P P P o A
P P P o A
Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
Set up the DSL parameters required by your ISP. These are vital for
building DSL connection to your ISP.
Multi-PVC channel – The selections displayed here are determined
by the page of Internet Access – Multi PVCs. Select M-PVCs
Channel means no selection will be chosen.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
Protocol - Drop down the list to choose the one provided by ISP.
Vigor2800 Series User's Guide