Draytek Vigor2800 Series User Manual page 97

Hotline
Session Timer
T.38 Fax function
Call Forwarding
DND (Do Not Disturb)
mode
Call Waiting
Call Transfer
Vigor2800 Series User's Guide
Check the box to enable it. Type in the SIP URL in the field for
dialing automatically when you pick up the phone set.
Check the box to enable the function. In the limited time that
you set in this field, if there is no response, the connecting call
will be closed automatically.
If the remote end also supports FAX function, you can check
this box to enable this function.
There are four options for you to choose. Disable is to close call
forwarding function. Always means all the incoming calls will
be forwarded into SIP URL without any reason. Busy means
the incoming calls will be forwarded into SIP URL only when
the local system is busy. No answer means if the incoming
calls do not receive any response, they will be forwarded to the
SIP URL by the time out.
SIP URL – Type in the SIP URL (e.g., aaa@draytel.org or
abc@iptel.org) as the site for call forwarded.
Time Out – Set the time out for the call forwarding. The
default setting is 30 sec.
Set a period of peace time without disturbing by VoIP phone
call. During the period, the one who dial in will listen busy
tone, yet the local user will not listen any ring tone.
Schedule - Enter the index of schedule profiles to control the
DND mode according to the preconfigured schedules. Refer to
section 3.5.2 Schedule for detailed configuration.
Check this box to invoke this function. A notice sound will
appear to tell the user new phone call is waiting for your
response. Click hook flash to pick up the waiting phone call.
Check this box to invoke this function. Click hook flash to
initiate another phone call. When the phone call connection
91