Table of Contents
Advertisement
Primary DNS
Second DNS
2
.
2
.
2
P
P
P
o
E
/
2
.
2
.
2
P
P
P
o
E
/
PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted
standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a
common broadband medium, such as a single DSL line, wireless device or cable modem. All
the users over the Ethernet can share a common connection. And the PPPoA stands for
Point-to-Point Protocol over ATM. PPPoA uses the PPP dial-up protocol with ATM as the
transport.
PPPoE or PPPoA is used for most of DSL modem users. All local users can share one PPPoE
or PPPoA connection for accessing the Internet. Your service provider will provide you
information about user name, password, and authentication mode.
If your ISP provides you the PPPoE or PPPoA connection, please select PPPoE or PPPoA
for this router. The following page will be shown:
ISP Name
User Name
Password
Confirm Password
Always On
Idle Timeout
Click Next for viewing summary of such connection.
18
Assign a private IP address to the primary DNS.
Assign a private IP address to the secondary DNS.
P
P
P
o
A
P
P
P
o
A
Assign a specific name for ISP requirement.
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Retype the password.
Check this box to allow the router connecting to Internet forever.
Type in the value (unit is second) as the idle timeout of the
connection.
Vigor3100 Series User's Guide
Advertisement
Table of Contents
