Draytek Vigor2800 Series User Manual page 122

Adsl2/2+ security router
Hide thumbs Also See for Vigor2800 Series:
Table of Contents

Advertisement

For using IPSec-based service, such as IPSec or L2TP with IPSec Policy, you have to set
general settings in IPSec General Setup, such as the pre-shared key that both parties
have known.
3.
Go to LAN-to-LAN. Click on one index number to edit a profile.
4.
Set Common Settings as shown below. You should enable both of VPN connections
because any one of the parties may start the VPN connection.
5.
Set Dial-Out Settings as shown below to dial to connect to Router B aggressively with
the selected Dial-Out method.
If an IPSec-based service is selected, you should further specify the remote peer IP
Address, IKE Authentication Method and IPSec Security Method for this Dial-Out
connection.
116
Vigor2800 Series User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vigor2800vVigor2800vgVigor2800g

Table of Contents