Handset Rest - Cisco 6901 User Manual

Handset Rest

Your system administrator may have mounted your phone on a wall. With a wall-mounted phone, you
might need to adjust the handset rest to ensure that the receiver will not slip out of the cradle.
1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
1
Rotate the tab 180 degrees.
2
Hold the tab between two fingers, with the corner notches facing you. Make sure the tab lines
3
up evenly with the slot in the handset cradle.
Press the tab evenly into the slot. An extension protrudes from the top of the rotated tab. Return
4
the handset to the handset rest.
Hookswitch
The hookswitch button is located on the cradle rest of your phone. You can press and quickly release
the hookswitch button to activate features (hookflash) on your phone. Your administrator can set up
the hookswitch timer.
6
2 3 4
OL-20826-01