Advertisement
Removing
or
installing saw blade
CAUTION :
Always be sure that the tool
is
switched
off
and unplugged before removing or installing
the blade.
To remove the blade, press the shaft lock
so that the blade cannot revolve and use
the wrench to loosen the hex bolt counter-
clockwise.
Then remove the hex bolt, outer flange and
the blade.
I
Fig.
To install the blade, follow the removal
procedure in reverse.
BE SURE TO TIGHTEN THE HEX BOLT
SE CU
R
E LY.
Saw blade
I
Fig.
CAUTION :
0
Be sure the blade i s installed with teeth pointing up at the front of the tool.
0
Use only the Makita wrench to install or remove the blade.
7
Advertisement
