Technical Specifications - NETGEAR CBVG834G Adminstrators User Manual

Default Settings and Technical Specifications
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
• To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
Test LED blinks rapidly). Your device will return to the factory configuration settings shown
in the table below.
• Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Feature
Smart Wizard
Gateway Login
Gateway login URL
Parental user name
Parental password
Administrator user name
Administrator password
Internet Connection
WAN MAC address
MTU Size
Local Network
LAN IP Address (aka Gateway IP address) 192.168.0.1
Gateway subnet mask
DHCP server
LAN IP starting IP address
Description
Enabled
http://192.168.0.1
MSO
changeme
admin
password
Use default hardware address
1500
255.255.255.0
Enabled
192.168.0.10
v1.0, February 2008
Appendix A
A-1