Restoring Factory Default Configuration Settings - NETGEAR CBVG834G Adminstrators User Manual

Wireless Cable Voice Gateway Model CBVG834G Adminstrators User Manual
2. In the SMTP Server Name field, type the outgoing SMTP mail server of your ISP (for
example, mail.myISP.com). You may be able to find this information in the configuration
menu of your e-mail program. If you leave this field blank, no alerts or logs will be sent.
3. Select the E-mail Alerts Enable check box.
4. Click E-mail Log to send the log immediately
5. Click Apply.
.

Restoring Factory Default Configuration Settings

The configuration settings are stored in a configuration file in the gateway. You can use Erase to
restore the factory default configuration settings. The default settings are listed in
Settings" in Appendix
To erase the configuration settings and return them to the factory default settings:
1. Under the Maintenance heading on the main menu, select Set Password.
Figure 4-4
2. For Restore Factory Defaults, select Yes.
3. Click Apply. The gateway reboots.
After an erase, the gateway user name is admin and the password is password. The LAN IP
address is 192.168.0.1, and the DHCP client is enabled.
Note: To restore the factory default configuration settings without knowing the login
password or IP address, use the reset button on the rear panel of the gateway.
Use a paper clip to press the button for at least 5 seconds.
Managing Your Network
A.
v1.0, February 2008
"Factory Default
4-5