Inbound And Outbound Rules - NETGEAR CBVG834G Adminstrators User Manual

Wireless Cable Voice Gateway Model CBVG834G Adminstrators User Manual
To add a device to the Trusted Devices table:
1. Select a device using one of the following methods:
• If the device is in the Trusted Devices table, click the radio button of that PC to capture is
MAC address.
• If the device is not in the Trusted Devices table, you can manually enter the MAC address
of the PC you want to block. If no Device Name displays when you enter its MAC
address, you can type a descriptive name in the Device Name field.
2. Click Add. The device is listed in the Trusted Devices table.
To delete a device from the Trusted Devices table:
1. Select the MAC address of the PC from the Trusted Devices table.
2. Click Delete to delete the entry.
3. Click Apply to activate the settings.

Inbound and Outbound Rules

You can use firewall rules to block or allow specific traffic passing through from one side to the
other. Inbound rules (WAN to LAN) restrict access by outsiders to private resources, selectively
allowing only specific outside users to access specific resources. Outbound rules (LAN to WAN)
determine what outside resources local users can have access to.
A firewall has two default rules, one for inbound traffic and one for outbound. The default rules of
the gateway are:
• Inbound: Block all access from outside except responses to requests from the LAN side.
Instructions for setting up inbound rules can be found in
• Outbound: Allow all access from the LAN side to the outside. Use Port Blocking to set up
outbound rules (see
You may define more rules that specify exceptions to the default rules. By adding custom rules,
you can block or allow access based on the service or application, source or destination IP
addresses, and time of day.
3-8
"Enabling or Disabling Content Filtering Services" on page
v1.0, February 2008
"Port Forwarding" on page 3-10
Protecting Your Network
3-6).