Ethernet And Serial Ports; Ethernet Port; Serial Port; Metal Enclosure - Cisco Aironet 340 Series Hardware Installation Manual

Chapter 1 Overview

Ethernet and Serial Ports

Ethernet Port

The access point's Ethernet port accepts an RJ-45 connector, linking the access point to your 10/100
Ethernet LAN. The 350 series access point receives power through the Ethernet cable from a switch with
inline power, from a power patch panel, or from the access point's power injector.

Serial Port

The access point's serial port provides console access to the access point's management system. Use a
nine-pin, straight-through, male-to-female serial cable to connect your computer's COM 1 or COM 2
port to the access point's serial port. Assign the following port settings to a terminal emulator to open
the management system pages: 9600 baud, 8 data bits, No parity, 1 stop bit, and Xon/Xoff flow control.

Metal Enclosure

The 350 series metal case access point contains a metal enclosure having adequate fire resistance and
low smoke-producing characteristics suitable for operation in a building's environmental air space in
accordance with Section 300-22(c) of the NEC. The 350 series metal case access point also supports an
industrial temperature operating range.
OL-0738-02
Cisco Aironet Access Point Hardware Installation Guide
Key Features
1-3