Chapter 1
Overview
Ethernet and Serial Ports
Ethernet Port
The access point's Ethernet port accepts an RJ-45 connector, linking the access point to your 10/100
Ethernet LAN. The 350 series access point receives power through the Ethernet cable from a switch with
inline power, from a power patch panel, or from the access point's power injector.
Serial Port
The access point's serial port provides console access to the access point's management system. Use a
nine-pin, straight-through, male-to-female serial cable to connect your computer's COM 1 or COM 2
port to the access point's serial port. Assign the following port settings to a terminal emulator to open
the management system pages: 9600 baud, 8 data bits, No parity, 1 stop bit, and Xon/Xoff flow control.
Metal Enclosure
The 350 series metal case access point contains a metal enclosure having adequate fire resistance and
low smoke-producing characteristics suitable for operation in a building's environmental air space in
accordance with Section 300-22(c) of the NEC. The 350 series metal case access point also supports an
industrial temperature operating range.
OL-7467-01
D r a f t 1 - C I S C O C O N F I D E N T I A L
Hardware Installation Guide for Cisco Aironet 350 Series Access Points Running Cisco IOS Software
Key Features
1-3