Basic Configuration
This chapter describes initial configuration of the access point using the Internet browser-based
management system. You can also reach the management system through the access point's serial port
or through Telnet. Consult Chapter 2 in the Cisco Aironet Access Point Software Configuration Guide
for complete instructions on using these interfaces.
This chapter includes the following sections:
Before You Start
•
Summary of Configuration Steps
•
Using the IP Setup Utility
•
Entering Basic Settings
•
Default Basic Settings
•
OL-0738-02
C H A P T E R
Cisco Aironet Access Point Hardware Installation Guide
3
3-1