Rev 1 Jun.13
2. Click Settings > Network > APN.
3. In the blank line, enter the APN (obtained from your carrier).
4. Enter the Username and Password, if these are required for the wireless network.
5. Select the network Authentication mode. The options are:
· None (default)
· PAP
· CHAP
· PAP or CHAP
6. Click
beside the new APN entry.
To select the APN to use:
1. Select Active beside the APN entry to be used.
To remove an APN entry:
1. Click
beside the APN entry.
Enable DMZ
In a DMZ (demilitarized zone) network configuration, a computer runs outside the
firewall in the DMZ. This computer intercepts incoming Internet traffic, providing an
extra layer of protection for the rest of the network.
To enable DMZ and designate a computer to screen incoming traffic:
1. On the Unite Manager homepage, log in as Administrator.
2. Click Settings > Router > Basic.
3. Select On beside DMZ Enabled.
Advanced Settings
51