Digicom 3G Router AM11 User Manual page 9

Step 3. Insert the RJ11 cable for a
Phone:
.You can make and receive 3G phone
calls by a RJ-11 Phone.
* RJ-11 Port is not supported on 3G Router
11AM.
Step 4 Insert the Ethernet cable into
LAN Port:
Insert the Ethernet patch cable into LAN
port on the back panel of the WiFi HSPA
IAD, and an available Ethernet port on the
network adapter in the computer you will
use to configure the unit.
Step 5 Insert the Ethernet patch cable
into Wired WAN port:
Insert the Ethernet patch cable into Wired
WAN port on the back panel of the WiFi
HSPA IAD.
NOTE: The step does not need if you
select the 3G Wireless WAN.
Step 6. Power on the IAD:
6.1. Connect the power adapter to the
receptor on the back panel of your WiFi
HSPA IAD.
6.2. Then plug the other end of the power
adapter into a wall outlet or power strip.
6.3. Turn on the Power Switch.