Digicom 3G Router AM11 User Manual page 19

C. PPP over Ethernet
1. Active WWAN for Auto-Failover: The WAN type will be change to wireless-WAN
automatically, if the wired-WAN is defunct.
2. PPPoE Account and Password: the account and password your ISP assigned to you.
For security, this field appears blank. If you don't want to change the password, leave
it empty.
3. Primary DNS/
Primary/Secondary DNS Server, contact to your ISP to get it.
4. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
5. Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE
session. Set it to zero or enable !Auto-reconnect" to disable this feature.
6. PPPoE Service Name: optional. Input the service name if your ISP requires it.
Secondary DNS: This feature allows you to assign a