Table of Contents
Advertisement
E. L2TP
First, please check your ISP assigned and select the IP Mode - Static IP Address or
Dynamic IP Address. For example: Use Static, the private IP address, subnet mask and
Gateway are your ISP assigned to you.
Activate WWAN for Auto-Failover: The WAN type will be change to
1.
wireless-WAN automatically, if the wired-WAN is defunct.
2.
IP Address, Subnet Mask and WAN Gateway IP: the private IP address, subnet
mask and Gateway IP your ISP assigned to you.
3.
Server IP Address/Name: the IP address or URL of the PPTP server.
4.
L2TP Account and Password: the account and password your ISP assigned to you.
If you don't want to change the password, keep it empty.
5.
Maximum Idle Time: the time of no activity to disconnect your L2TP session. Set it
to zero or enable "Auto-reconnect" to disable this feature. If Auto-reconnect is
enabled, this product will connect with ISP automatically, after system is restarted
or connection is dropped.
6.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Advertisement
Table of Contents
