Digicom 3G Router AM11 User Manual page 45

System Log
This page support two methods to export system logs to specific destination by means of
syslog (UDP) and SMTP(TCP). The items you have to setup including:
IP Address for Sys log
Host IP of destination where sys log will be sent to.
Check Enable to enable this function.
Setting of E-mail Alert
Check if you want to enable Email alert (send syslog via email).
SMTP Server IP and Port
Input the SMTP server IP and port, which are connected with ':'. If you do not specify port
number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
SMTP Username and Password
Input a user account and password for the SMTP server.
E-mail address
The recipients who will receive these logs, you can assign more than 1 recipient, using ';' or ','
to separate these email addresses.
E-mail Subject
The subject of email alert, this setting is optional.
View Log...
Reference the section Toolbox/System Info.
Click on "Save" to store your setting or "Undo" to give up