Digicom 3G Router AM11 User Manual page 42

MAC Control
MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
1. MAC Address Control
Check "Enable" to enable the "MAC Address Control". All of the settings in this page
will take effect only when "Enable" is checked.
2. Connection control
Check "Connection control" to enable the controlling of which wired and wireless
clients can connect with this device. If a client is denied to connect with this device, it
means the client can't access to the Internet either. Choose "allow" or "deny" to allow
or deny the clients, whose MAC addresses are not in the "Control table" (please see
below), to connect with this device.
3. Association control
Check "Association control" to enable the controlling of which wireless client can
associate to the wireless LAN. If a client is denied to associate to the wireless LAN, it
means the client can't send or receive any data via this device. Choose "allow" or
"deny" to allow or deny the clients, whose MAC addresses are not in the "Control
table", to associate to the wireless LAN
Click "Save" to store your setting or "Undo" to give up