Changing the IP Address
Note: If the TeraStation is being used in a domain environment, the IP address cannot be changed by NAS
Navigator2. To change the IP address, the domain environment administrator must change it at the domain server.
1
Right-click on your TeraStation's icon, then click Properties.
For Mac OS, click the TeraStation icon while holding down the control key, then click Configure.
2
Click the IP Address tab, enter the desired settings, and click OK.
Notes:
• If you don't know how to configure these settings, check "Use DHCP".
• If you are prompted to enter the administrator's password, enter the TeraStation's password (it is set to "password"
by factory default).
53