Buffalo TeraStation WSS 5000 User Manual page 33

18
Right-click the initialized hard drive, then select Convert to Dynamic Disk.
A RAID array cannot be built unless the hard drive is converted to a dynamic disk.
19
Select the step depending on your purpose for a created volume.
To create a new volume:
(a) Right-click the new dynamic disk and select New Volume.
(b) Follow the instructions on the screen to create a new volume.
To restore a RAID 5 volume (RAID resynchronization):
(a) Right-click the volume labeled "Failed Redundancy" and click Restore Volume.
(b) When "Select the disk from the following list" is displayed, select the drive to restore, then click OK.
Note: Perform steps (a) and (b) for each volume that requires RAID resynchronization.
(c) Right-click the volume labeled "Missing" and select Delete Disk.
33