Removing A 2.5-Inch Hdd / Ssd Module - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Server primergy tx2540 m1

Hide thumbs Also See for PRIMERGY TX2540 M1:

Table of Contents

Hard disk drives / solid state drives

Removing a 2.5-inch HDD / SSD module

Figure 70: Removing a 2.5-inch HDD / SSD module

Ê Pinch the green locking clips and fully open the locking lever (see figure 68).

Ê Wait about 30 seconds to allow the hard disk drive to spin down.

This is not necessary when removing a solid state drive.

Ê Pull the HDD / SSD module completely out of its bay.

Upgrade and Maintenance Manual