6.3
Installing HDD/SSD modules
6.3.1
Installing 2.5-inch HDD/SSD modules
6.3.1.1
Removing a 2.5-inch HDD/SSD dummy module
Figure 24: Removing a 2.5-inch HDD/SSD dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Keep the dummy module for future use.
Always replace dummy modules into unused HDD/SSD bays to comply
with applicable EMC regulations and satisfy cooling requirements.
TX1330 M4
Operating Manual
Operation
85