Applying Thermal Paste - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Processors
11.6

Applying thermal paste

Field Replaceable Unit
(FRU)
Tools: tool-less
I
– For the Japanese market, the service engineer must follow the
instruction provided separately.
– If the processor upgrade or replacement kit contains a new processor
heat sink, a thin layer of thermal compound has already been pre-
applied to its lower surface. In this case, please proceed with section
"Installing processor heat sinks" on page
Figure 203: Thermal paste syringe
One thermal compound syringe (A3C40142460 / 34035576) contains thermal
paste for three processors.
288 Upgrade and Maintenance Manual
Hardware: 5 minutes
284.
TX2540 M1