Upgrading To 16X 2.5-Inch Hdd / Ssd Configurations; Preliminary Steps; Removing The 8X 2.5-Inch Hdd Front Panel - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.2.9 Upgrading to 16x 2.5-inch HDD / SSD
configurations
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.2.9.1

Preliminary steps

"Disabling BitLocker functionality" on page 77
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
"Removing the system fan holder" on page 74
Ê
"Removing 2.5-inch HDD / SSD modules" on page 145
Ê
7.2.9.2

Removing the 8x 2.5-inch HDD front panel

Figure 75: Removing the 8x 2.5-inch HDD front panel
Ê Remove four screws from the 8x 2.5-inch HDD front panel.
Ê Pull up on the 8x 2.5-inch HDD front panel to disengage it from the chassis.
152 Upgrade and Maintenance Manual
Hardware: 20 minutes
TX2540 M1