Figure 27 Location Of Failsafe Jumper On Main Pwa Of Electronics Module - Honeywell SMV 3000 User Manual

8.3 Changing Default Failsafe Direction,
Procedure, continued
Table 26
Figure 27 Location of Failsafe Jumper on main PWA of Electronics Module.
Main PWA
PROM
Location
PWA
Connector
1/99
Cutting Failsafe Jumper, Continued
Step
10 Turn ON transmitter power.
11 Perform Upload of the SMV database to the SCT.
12 Open the Status Tab Card. Read the gross and detailed status
messages of the transmitter. Verify that the status messages are the
same as recorded in Step 3.
Plastic
Flex Tape
Bracket
Connector
Screw
Power
Connector
Write
Protect
Jumper
PWA
Connector
Screw
SMV 3000 Transmitter User's Manual
Continued
Action
Failsafe
Jumper
Daughter PWA
Temperature
Input
Connector
Screw
97