Honeywell DCP552 Mark II User Manual page 90

Chapter 6. OPERATION
Message key function (when variable parameter PA03 is set to 1)
Display D1
Display D2
Display D3
Display D4
Display D5
Display D6
Handling Precautions
6-8
Cycles through the message panel displays.
• Display D1, display D2, display D3, display D4, display D5, display D6,
display D1.
• Models with CP computation compensation the CH2 PV values have
the following meaning depending on variable parameter PA44 settings.
• When PA44 is set to 0: CP value (unit: %) or PO
• When PA44 is set to 1: millivolt voltage value (unit: mV)
• When PA44 is set to 2: O
values (unit 10
2
sensor impedance value (unit: kΩ)
2
-20
atm)