Honeywell DCP552 Mark II User Manual page 224

Setup data setting
No. Item code Item
1 PV1 range number
C 01
2 PV1 temperature unit
C 02
3 PV1 decimal point position
C 03
4 C 04 PV1 linear decimal point position 1
5 PV1 linear range lower limit
C 05
6 C 06 PV1 linear range upper limit
7 PV1 cold junction compensation
C 07
8 PV1 root extraction
C 08
9 PV1 root extraction dropout
C 09
10 C 10 PV1 cold junction bias
11 C 11 PV2 range number
12 C 12 PV2 temperature unit
13 C 13 PV2 decimal point position
14 C 14 PV2 linear decimal point position 1
15 C 15 PV2 linear range lower limit
16 C 16 PV2 linear range upper limit
17 C 17 PV2 cold junction compensation
18 C 18 PV2 root extraction
19 C 19 PV2 root extraction dropout
20 C 20 PV2 cold junction bias
21 C 21 Control output system (CH1)
22 C 22 Control output system (CH2)
23 C 23 Control action (CH1)
24 C 24 Control action (CH2)
30 C 30 PV equalizer
31 C 31 End of operation (CH1)
32 C 32 Manipulated variable in READY 0.0
mode (CH1)
33 C 33 Manipulated variable setting
in PV overrange (CH1)
Factory default User
settings settings
0 0 to 16
48 to 52
64 to 71
96 to 103 : Resistance temperature detector
128 to 134 : Linear (DC current and DC voltage)
0 0 : Celsius (°C)
1 : Fahrenheit (°F)
1 0 to 2
0 to 4
0 PVU –19999 to +20000 PVU(PV1)
10000 PVU –19999 to +20000 PVU(PV1)
0 0 : Provided (Compensated inside the instrument)
1 : Not provided (Compensated outside the instrument)
0 0 : Not provided
1 : Provided
0.2 0.2 to 10.0% (Ratio to input range)
0.0 –1.0 to + 1.0°C
0 0 to 16
48 to 52
64 to 71
96 to 103 : Resistance temperature detector
128 to 134 : Linear (DC current and DC voltage)
135
0 0 : Celsius (°C)
1 : Fahrenheit (°F)
1 0 to 2
0 to 4
0 PVU –19999 to +20000 PVU(PV2)
10000 PVU –19999 to +20000 PVU(PV2)
0 0 : Provided (Compensated inside the instrument)
1 : Not provided (Compensated outside the instrument)
0 0 : Not provided
1 : Provided
0.2 0.2 to 10.0% (Ratio to input range)
0.0 –1.0 to + 1.0°C
1 1 : 5G output (Current proportional control output)
2 : 6D output (Voltage time proportional control output) system A
3 : 6D output (Voltage time proportional control output) system B
4 : 8D output (open collector time proportional control output) system A
5 : 8D output (open collector time proportional control output) system B
1
0 0 : PID — A reverse operation
1 : PID — A normal operation
2 : PID — B reverse operation
3 : PID — B normal operation
0
0 0 : None
1 : PV1 only
2 : PV2 only
3 : Both PV1 and PV2
0 0 : READY mode
1 : END mode
–5.0 to +105.0%
0 0 : No
1 : Yes
DCP552 Parameter Work Sheet
Settings and descriptions
: Thermocouple
: Linear (DC current and DC voltage)
: Resistance temperature detector
: Thermocouple
: Linear (DC current and DC voltage)
: Resistance temperature detector
: O sensor (CP)
2
15