Table of Contents
Advertisement
PID group, output limiter group number items cannot be displayed with ↑ and ↓ keys
Cause
Programming item display off
G.SOAK items, PV shift items and repeat items cannot be displayed with ↑ and ↓ keys
Cause
Programming item display off
PV start items, cycle items and pattern link items cannot be displayed with ↑ and ↓ keys
Cause
Programming item display off
Segment insertion and deletion cannot be confirmed with FUNC and ENTER keys
Cause
Set to memory protect.
Program being set is running (in RUN,
HOLD, FAST, END, READY FAST).
Not set to pattern item on programming map. Move to the pattern item on the programming map.
This segment is not set on the programming
map.
Program deletion cannot be confirmed with FUNC and ENTER keys during pattern item
registration
Cause
Program being set is running (in RUN,
HOLD, FAST, END, READY FAST).
Set setup data
to 0.
C58
Set setup data
to 0.
C59
Set setup data
to 0.
C60
Set variable parameter
PA02
Set READY mode to execute RESET operation (
).
RUN/HOLD keys
Move to a set segment or set the segment.
Set READY mode to execute RESET operation (
).
RUN/HOLD keys
Chapter 10. TROUBLESHOOTING
Measure
Measure
Measure
Measure
to 0, 2 or 4.
PROG +
Measure
PROG +
10-7
Advertisement
Table of Contents
