Grizzly T25862 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T25862 Open Stand is designed to be
used with the Model G1183 and G1276 Heavy-
Duty Combination Sanders.
Inventory
Description
A. Stand Legs ................................................. 4
B. Short Cross Braces .................................... 2
C. Long Cross Braces ..................................... 2
D. Stand Top ................................................... 1
E. Rubber Feet ............................................... 4
F.
Hardware Bag (Not Shown) ........................ 1
—Hex Bolts ⁄ "-16 x 4" .............................. 4
3
8
—Hex Nuts ⁄ "-16....................................... 4
3
8
—Flat Washers
3
—Flange Screws
—Phillips Head Screws
—Hex Nuts ⁄ "-20 .................................... 44
1
4
—Flat Washers
1
A
B
C
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄ " ..................................... 8
8
⁄ "-20 x ⁄ " ................... 40
1 1
4 2
⁄ "-20 x 1" ............ 4
1
4
⁄ "-20 .............................. 44
4
E
D
COPYRIGHT © APRIL, 2014 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
#BL16519 PRINTED IN TAIWAN
MODEL T25862
OPEN STAND FOR
MODEL G1183/G1276
Tools Needed for Assembly
Description
A. Phillips Head Screwdriver #2 ..................... 1
B. Wrench or Socket 10, 14, 17mm ..........1 Ea.
Assembly
Qty We recommend assembling the stand upside
down. After the stand is assembled, two strong
people are required to lift the G1183/G1276 onto
the stand and hold it in place until firmly secured
to the stand.
1.
Place stand top upside down on a flat sur-
face.
2.
Secure legs to top with (24)
screws, (24)
hex nuts. Only hand-tighten stand fasteners
for this step.
Leg
INSTRUCTIONS
⁄ " flat washers, and (24)
1
4
x 24
Top
Qty
⁄ "-20 x ⁄ " flange
1 1
4 2
⁄ "-20
1
4