For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
These workbench stands are designed to be used
with solid wood workbench tops, and are ideal for
close-in detail work, such as soldering, assembly,
gunsmithing, etc. Both stands feature all-steel
frame construction and re-inforced corners.
*Shown with optional T1252 Beech Workbench Top
*Shown with optional T1253 Beech Workbench Top
Figure 1. Model T31830/T31831 Workbench
Specifications
•
Workbench Stand (Length x Width)
—T31830 ......................................46
—T31831 ......................................64
•
Height .................................................... 35
•
Maximum Weight Capacity .............2500 lbs.
•
Approximate Assembly Time ........30 Minutes
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
T31830
T31831
Stands.
⁄
1
⁄
1
COPYRIGHT © FEBRUARY, 2020 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
(FOR MODELS MFD. SINCE 01/20) #KS20955 PRINTED IN TAIWAN
MODEL T31830/T31831
WORKBENCH STAND
Inventory (Figure 2)
Description
A. End Frames ................................................. 2
B. Upper Supports ........................................... 2
C. Lower Support ............................................. 1
D. Rubber Feet M10-1.5 x 35 ........................... 4
E. Hardware Bag
—External Corner Braces ........................... 6
— Internal Corner Braces ............................. 6
—Button Hd Cap Screws M8-1.25 x 55 .... 22
— Flat Washers 8mm ................................. 40
— Lock Nuts M8-1.25 ..................................18
—Open-End Wrench 13 x 14mm ................ 1
—Hex Wrench 5mm .................................... 1
F.
Steel Bars
B
C
Figure 2. Model T31830/T31831 Inventory.
" x 20"
2
" x 20"
2
⁄
"
1
2
INSTRUCTIONS
⁄
" x 11
⁄
" .................................. 8
5
3
8
4
A
Qty
D
E
F
V1.02.20