Honeywell HVE1 Getting Started Manual page 24

30 | HVE1/HVE4/HVE8 Encoders Getting Started Guide
OR
• Enter the time in the time selector and click
The color of the video on the progress bar indicates the type of video.
Log
The operation, alarm, exception, and device information can be stored in log files, which can be viewed and exported
at any time.
Before you begin:
• Ensure that the connected encoder has a HDD or a network disk. The Log function works only with an encoder
that has a HDD or a network disk.
• Ensure the HDD or network disk has been initialized for first-time use.
1. Click the Log tab.
2. Set the log search conditions to refine your search. Select the Major Type, Minor Type, Start Time, and End Time.
3. Click Search to search the log files.
The log files that meet the search conditions display on the Log window.
www.honeywell.com/security
Figure 23 Progress Bar
Figure 24 Time Selector
Figure 25 Playback Video Types
Figure 26 Found Log Files
to locate the playback point.