Honeywell HVE1 Getting Started Manual page 12

18 | HVE1/HVE4/HVE8 Encoders Getting Started Guide
HVE8(X)
Front Panel
Interface Element
1 POWER
2 STATUS
3 Tx/Rx
Rear Panel
Interface Element
1 VIDEO IN
2 LINE IN
3 AUDIO OUT
4 AUDIO IN
www.honeywell.com/security
Figure 8 NVE8 Front Panel
Table 6 HVE1 Front Panel
Function
Lights red when the device is powered on.
Lights red when data is being read from or written to the HDD.
Does not light when the encoder is not connected to the network.
Blinks green when data is being transmitted or received.
Blinks at a higher frequency when the data that is being transmitted or
received is large.
Figure 9 HVE8 Rear Panel
3
1 2
Table 7 HVE1 Rear Panel
Function
BNC connectors for video input.
3.5mm connector for two-way audio input. Connect to an audio input
device or an active pick-up, a microphone, etc.
3.5mm connector for audio output. Connect an audio output device,
such as a loudspeaker.
Input for audio.
4 5 6 7
9
8 10 11