Clear Rep Counters - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

clear rep counters

To clear Resilient Ethernet Protocol (REP) counters for the specified interface or all interfaces, use the

clear rep counters privileged EXEC command

Syntax Description

interface interface-id

Command Modes

Privileged EXEC

Command History

Usage Guidelines

You can clear all REP counters by using the clear rep counters command, or you can clear only the

counters for the interface by using the clear rep counters interface interface-id command.

When you enter the clear rep counters command, only the counters visible in the output of the show

interface rep detail command are cleared. SNMP visible counters are not cleared because they are

This example shows how to clear all REP counters for all REP interfaces:

Switch# clear rep counters

You can verify that REP information was deleted by entering the show interfaces rep detail privileged

EXEC command.

Related Commands

show interfaces rep [detail]

clear rep counters [interface interface-id]

(Optional) Specifies a REP interface whose counters should be cleared.

Modification

This command was introduced.

Displays detailed REP configuration and status information.

Catalyst 3750-X and 3560-X Switch Command Reference

clear rep counters

Catalyst 3560-x