Show Vlan Filter - Cisco Catalyst 3750-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show vlan filter

Use the show vlan filter privileged EXEC command to display information about all VLAN filters or
about a particular VLAN or VLAN access map.
Note This command is not supported on switches running the LAN base feature set.
Syntax Description access-map name
vlan vlan-id
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Examples
This is an example of output from the show vlan filter command:
Switch# show vlan filter
VLAN Map map_1 is filtering VLANs:
20-22
Related Commands Command
show vlan access-map
vlan access-map
vlan filter
OL-29704-01
show vlan filter [access-map name | vlan vlan-id]
(Optional) Display filtering information for the specified VLAN access map.
(Optional) Display filtering information for the specified VLAN. The range is
1 to 4094.
Modification
This command was introduced.
Description
Displays information about a particular VLAN access map or for all
VLAN access maps.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.
Catalyst 3750-X and 3560-X Switch Command Reference
show vlan filter
2-829