Cisco Catalyst 3750-X Command Reference Manual page 857

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Primary Secondary Type
------ --------- ----------------- ------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
20
20
20
<output truncated>
Table 2-52
Field
VLAN
Name
Status
Ports
Type
SAID
MTU
Parent
RingNo
BrdgNo
Stp
BrdgMode
Trans1
Trans2
Remote SPAN VLANs
Primary/Secondary/
Type/Ports
This is an example of output from the show vlan dot1q tag native command:
Switch> show vlan dot1q tag native
dot1q native vlan tagging is disabled
OL-29704-01
25 isolated Gi1/0/1,Gi3/0/1
30 community Gi1/0/1, Gi3/0/1
35 community Gi1/0/1, Gi3/0/1
show vlan Command Output Fields
Description
VLAN number.
Name, if configured, of the VLAN.
Status of the VLAN (active or suspend).
Ports that belong to the VLAN.
Media type of the VLAN.
Security association ID value for the VLAN.
Maximum transmission unit size for the VLAN.
Parent VLAN, if one exists.
Ring number for the VLAN, if applicable.
Bridge number for the VLAN, if applicable.
Spanning Tree Protocol type used on the VLAN.
Bridging mode for this VLAN—possible values are source-route bridging
(SRB) and source-route transparent (SRT); the default is SRB.
Translation bridge 1.
Translation bridge 2.
Identifies any RSPAN VLANs that have been configured.
Includes any private VLANs that have been configured, including the
primary VLAN ID, the secondary VLAN ID, the type of secondary VLAN
(community or isolated), and the ports that belong to it.
Ports
Catalyst 3750-X and 3560-X Switch Command Reference
show vlan
2-825