Cisco Catalyst 3750-X Command Reference Manual page 742

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

show lacp internal Field Descriptions (continued)

This is an example of output from the show lacp neighbor command:

Switch> show lacp neighbor

Channel group 3 neighbors

Partner's information:

Partner's information:

This is an example of output from the show lacp sys-id command:

Switch> show lacp sys-id

32765,0002.4b29.3a00

The system identification is made up of the system priority and the system MAC address. The first two

bytes are the system priority, and the last six bytes are the globally administered individual MAC address

associated to the system.

Catalyst 3750-X and 3560-X Switch Command Reference

Port number.

State variables for the port, encoded as individual bits within a single octet with these

bit0: LACP_Activity

bit1: LACP_Timeout

bit2: Aggregation

bit3: Synchronization

bit4: Collecting

bit5: Distributing

bit6: Defaulted

bit7: Expired

In the list above, bit7 is the MSB and bit0 is the LSB.

S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs

A - Device is in Active mode

32768,0007.eb49.5e80

LACP Partner

Port Priority

32768,0007.eb49.5e80

LACP Partner

Port Priority

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

P - Device is in Passive mode

Catalyst 3560-x