Installing the DISC TITLE PRINTER Application
This section describes the steps you need to perform to install the DISC TITLE
PRINTER application.
Important!
• Be sure to install the DISC TITLE PRINTER application before you connect
the printer to your PC. (See page 19.) Connecting before you install the
application can result in improper operation.
• Make sure you quit all other applications running on your PC before starting
installation. Installing while other applications are running can result in
incorrect installation.
• The examples in this manual show installation from a CD drive named drive E:.
To install the application
1.
Start up Windows, and place the DISC TITLE PRINTER Application CD-
ROM into your computer's CD drive.
• The installer should start up automatically, and display the screen shown
below.
Note
Depending on how your PC is configured, the above screen may not appear
automatically. If this screen does not appear on your computer, click the
Windows Start button and then select Run. On the dialog box that appears,
type in E:\DISC_TITLE_PRINTER\Setup\SETUP.EXE and then click OK.
16
2.
Click Next.
This causes the Preceding License Agreement to appear.
Important!
Be sure to read all of the terms and conditions of the Preceding License
Agreement.
3.
If you agree to be bound by the agreement, click Yes.
This causes the Software End User License Agreement to appear.
Important!
Be sure to read all of the terms and conditions of the Software End User
License agreement.