Configuration Features - Cisco 7960G Administration Manual

Chapter 1 Product Overview
The Cisco SIP IP phone supports Cisco IP Phone Services version 3.0 only.
Note
For more information about using XML on your Cisco SIP IP phone, refer to the following:
•
•
•
Network Capabilities
The Cisco Unified IP Phone 7960G and 7940G supports the following networking capabilities:
•
•
•

Configuration Features

With the Cisco Unified IP Phone 7960G and 7940G, you can do the following:
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-7890-01
IP Telephony
http://www.hotdispatch.com/cisco-ip-telephony
Cisco CallManager Services Developer Kit
http://www.cisco.com/pcgi-bin/dev_support/access_level/product_support
Developing Cisco IP Phone Services by Darrick Deel, Mark Nelson, and Anne Smith,
ISBN 1-58705-060-9
Telnet support
Allows you to use Telnet to connect directly to the phone to debug and troubleshoot the phone.
Ping support
Allows you to ping from the phone to see if it is operational and assess how long the response time
from the phone is.
Traceroute support
Allows you to see the path that the signal traverses in the route to its desired destination.
Configure an Ethernet port mode and speed
Register with or unregister from a proxy server or backup proxy server
Specify a TFTP boot directory
Configure a label for phone-identification display purposes
Configure a name for caller identification purposes for each active line on a phone
Configure a 12- or 24-hour user interface time display
Lock and unlock the phone
Configure local call forwarding
Configure autoconnect (intercom)
Configure speed dialing
Configure the same directory number (DN) on several lines
Configure the phone to collect terminating-call data for troubleshooting and billing purposes
Clear the message-waiting indicator from the console (by means of the command-line interface or
by using Telnet in privileged access mode)
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
Network Capabilities
1-9