Advanced Radio Configuration For Profile Groups - NETGEAR ProSafe WC7520 Reference Manual

2. Configure the settings as explained in the following table:
Table 19. Schedule radio on/off settings
Setting
Current Time
Schedule Radio On/Off
Schedule at
Schedule On
Duration
3. Click Apply to save your settings.

Advanced Radio Configuration for Profile Groups

You can schedule the radio for specific groups to match their network usage. For example,
during registration, a school could leave the radios on for the main office or administration
building, and turn off radios in buildings that contain only classrooms that are not in use.

To schedule the radio for profile groups:
1. Select Configuration > Wireless > Advanced > Radio On/Off. The advanced
Schedule screen displays:
Figure 43.
2. Click a tab to select a profile group.
ProSafe 20-AP Wireless Controller WC7520
Description
This is a nonconfigurable field that displays the current time for the wireless
controller.
You can specify either when the radio is on by selecting the On radio button or
when it is off by selecting the Off radio button.
From the drop-down lists, specify the time (hours and minutes) when you want
to turn the radio either on or off.
Select the check boxes for each day of the week that you want to schedule the
radio to be either on or off.
From the drop-down lists, specify the duration (in hours and minutes) that the
radio should be either on or off.
Configuring Wireless and QoS Settings
86