Configure Radius Authentication Server Groups - NETGEAR ProSafe WC7520 Reference Manual

Configure RADIUS Authentication Server Groups

For greater security flexibility, you can create up to 8 external RADIUS servers to
authenticate different groups of users. After you have set up these authentication servers,
you can assign any of them, including the basic RADIUS server, to any profile, whether in the
basic profile group or in an advanced profile group.

To set up a RADIUS authentication group:
1. Select Configuration > Security > Advanced > Authentication Server. The advanced
Authentication Server screen displays:
Figure 58.
2. Click the + button to create an additional authentication group. The new authentication group
displays on the advanced Authentication Server screen, and the tab for the new
authentication is automatically selected to let you configure the new group.
Note: By default, authentication groups are named Auth-1, Auth-2, Auth-3,
and so on. You can change these authentication group names.
3. In the Group Name field, enter a unique name for the authentication group.
4. Specify the settings as described in the External RADIUS Server section in the previous
table.
5. Click Apply to save your settings.
To delete an authentication group, select its tab, and then click Delete.
ProSafe 20-AP Wireless Controller WC7520
Configuring Network Access and Security
118
Click + to add another authentication group.